Panel & Circuit Breaker Replacement Service Near Sioux Falls, SD

The first step an electrician performs is to assess the existing electrical panel and circuit breaker. Determine the size and type of panel, as well as the capacity of the existing circuit breaker. Before any work begins, the power to the entire electrical system must be turned off at the main circuit breaker. This ensures that there is no live electricity running through the panel while the work is being done.

Depending on your location, you may need to obtain permits to replace an electrical panel. This is typically done through your local building department, and it ensures that the work is done to code.

The electrician will carefully disconnect all of the wiring from the old panel. This includes the service wires coming in from the utility, as well as all branch circuit wires. The old panel and circuit breaker are removed from the wall. This can be a heavy and awkward job, as electrical panels are typically mounted securely.

The new electrical panel is installed in the same location as the old one. It is secured to the wall and properly grounded. The electrician will then connect all of the wiring to the new panel. This includes reattaching the service wires and connecting all of the branch circuits.

The appropriate circuit breakers are installed in the new panel. These should be properly sized for the circuits they protect. The circuit breakers are labeled to indicate which circuits they control. This is important for future maintenance and troubleshooting.

Once all of the connections have been made and the work has been inspected and approved (if required by local regulations), the power can be turned back on at the main circuit breaker. The electrician should test all circuits to ensure they are functioning correctly and that there are no issues such as overloads or short circuits.